Back-support belt (model 111)

Description

Application:

The back support belt is designed for fixation of the waist, reducing rehabilitation time after injuries, following surgeries — in spine and lumbar area, in cases of spinal instability or vertebral displacement, as well as in the case of osteochondrosis, radiculitis or neuralgia. May be used when performing heavy work, thus saving the spine.

Advantages:

The back support belt is made from breathable and moisture-wicking material with high cotton content, which prevents excessive sweating and allows the skin to breath.
Structural solutions: the back support belt has integrated inserts in the back part and reinforcement straps , which helps to ensure necessary stability and degree of stretch. “Velcro” snap facilitates fixating of the belt and ensures the necessary degree of stretch for maximum comfort.

Instructions of use:

The size of the back support belt shall be selected in accordance with the added table on the packaging. The belt may be worn in direct contact with the skin, but we recommend wearing a cotton shirt under the belt. The belt is recommended to be applied while lying on the back. First the reinforcement straps shall be released. Connect the ends of the belt with a light or medium tension, overlapping each other, then at the same time take the ends of the reinforcing strap, tighten to the required degree of stretch and fasten it in the intended places on the sides of the belt. If, when standing up, the stretch of the belt is unsuitable, this procedure shall be repeated by changing the degree of the stretch.
Only use the product according to the recommendations of the specialist and instruction. The product must not be used on an open wound.

Composition:

Cotton – 33%
Polyacrylic – 23%
Elastane – 19%
Polyester – 15%
Polyamide – 10%

Care advice:

• The product should be washed manually, with the water temperature below +35 °C, using mild detergents.
• The product with “Velcro” snap shall be washed and dried in closed condition.
• When washing and rinsing, the belt must not be rubbed and wrung.
• Ironing of the belt is not recommended.
• The product shall be stored in clean and dry, well ventilated premises, where the air temperature ranges from +5 °C to 25 °C, and the air humidity is within 50%-70% range.

Additional information:

Recommended usage time: 1 year. Storage warranty period: 5 years from the date of manufacture indicated on the packaging.

Manufacturer: Liepaja Special Economic Zone LLC Lauma Medical (LSEZ LLC Lauma Medical), Ziemelu st. 19, Liepaja, LV-3405, Latvia.